-
Tied and tested over many years especially in
high-speed applications
-
Longer Component life due to optimized water
protection and good pressure absorption capacity.
-
Excellent resistance to water and media as
well as above average anticorrosive additives protect bearings
against premature failure, thus helping to minimize repair cost
-
Low intrinsic bearing heat due to low
lubricant friction enabling longer service life
-
Customary centralized lubricating systems*
VOX LHS 12 High speed grease with a
good pressure absorption capacity. It consists of combination of
ester oil, synthetic hydrocarbon oil and mineral oil and barium
complex soap. It offers good protection against wear and
corrosion and is resistant to water media and oxidation.
VOX LHS 12 is primarily used for
spindle bearings and high-speed plain bearings, e.g. in machine
tools and textile machines. Further applications are threaded
spindles, ball screws operating under high loads, running. gear
bearings, as a long-term grease in cable way bearings and in
precision engineering. It may also be used for the lubrication
of tooth flanks in precision gears (e.g. bevel gears in milling
machines, electromechanical valve actuators).
The lubricant is applied by brush, spatula,
grease gun or grease cartridge. Owing to the different
compositions of elastomers and plastic materials, compatibility
prior to series application with elastomers or plastics.
The minimum shelf life is approximately 36
months if the product is stored in its unopened original
container in a dry, frost-free place.
1 Kg. Cans
15 Kgs. Buckets
MATERIAL SAFETY DATA
SHEETS
|
Material safety data sheets can be downloaded
or requested via our website http://localhost/pub.
The product can normally be applied by means of centralized
lubricating systems. please not, however, that due to different
system configurations and application conditions the palpability
of the product has to be confirmed for each individual
application. We will be pleased to provide assistance in this
matter.
PRODUCT DATA
|
VOX LHS 12 |
Service Temperature range* |
-40 to 180 |
Texture |
homogeneous, short flbered |
Density at 20 ºC, (g/cm²) approx. |
0.99 |
Worked penetration, DIN ISO 2137, at 25ºC, (0.1mm) |
265 – 295 |
Base
all viscosity, DIN 51562 pt. 01at 40ºC, mm²/s), approx.
at 100ºC, mm²/s), approx. |
214.5 |
Apparent dynamic viscosity ****
viscosity grade. |
M |
Corrosion protection (Emcor test) DIN 51 802, 1 week,
distilled water, corrosion degree. |
1 |
Drop
Point, DIN ISO 2126,(0C) |
220 |
Speed factor (n x dm),(mm x min -1), approx. |
1,000,000 |
|