LGHT 3/2 is an NLGI 2.5 Grade
grease with ISO VG 460 Synthetic base and is an extreme pressure
grease recommended for tough industrial applications. it
provides outstanding bearing protection under heavy loads at low
to moderate speeds and in applications where water resistance is
a critical factor. Voxlith LGHT 3/2 has demonstrated outstanding
performance in steel mills. paper mills and marine applications.
The recommended operating temperature range is
-40 ºC to 250 ºC
Feature & Benefits
The LGHT 3/2 brand oils & greases
are recognized and appreciated around the world for their
innovation and outstanding performance. These molecular design
PAO synthetic products. pioneered by (VOX) research scientists,
symbolize the continuing commitment to using advanced
technology to provide outstanding products. A key factor in the
development of LGHT 3/2 were the close contacts between our
scientists and application specialists with key Original
Equipment Manufacturers (VOX) to ensure that our product
offerings would provide exceptional performance (VOX) to ensure
that our product offerings would provide exceptional performance
in the continually evolving industrial equipment designs.
Our Work with equipment builders has
helped confirm the results from our own laboratory tests showing
the exceptional performance of LGHT 3/2 of the lubricants. These
benefits include longer grease life. enhanced bearing protection
and bearing life, wide temperature range of applications. and
the potential for improved mechanical efficiency and energy
saving.
To combat high thermal exposure of
the oil our product formulation scientists chose proprietary
synthetic base oils for LGHT 3/2 oils because of their
exceptional thermal/oxidative resistance potential. Our
scientists developed a state of the art lithium complex
thickener technology and used specific additives to enhance the
performance of each grade of the LGHT 3/2 product family.
The Voxlith LGHT 3/2 Series grease
offer the following features and benefits.
CHARACTERISTICS
|
LIMITS |
NLGI
Grade |
2 |
Thickener Type |
Lithium Complex |
Penetration, Worked, 20 ºC, ASTM D 217 |
305 |
Dropping Point, ºC, ASTM D 2265 |
255 |
Viscosity of Oil, ASTM D 445 |
|
cSt
@ 40 ºC |
220 |
Timken Ok Load, ASTM D 4049, wt% loss |
50 |
4-Ball Weld, ASTM D 2596, Load, Kg |
250 |
Water Spray Off, ASTM D 1264, Loss at 79ºC. % wt. |
45 |
Water Washout, ASTM D 6138 |
4 |
Rust
Protection, ASTM D 1743, Rating |
|
Corrosion Protection, ASTM D 1743, Rating |
Pass |
USSteel Mobility @ 18ºC. |
6 |
|