Long service life due to good corrosion
protection as well as again and oxidation stability, hence cost
savings.
Tried -and-tested for many years, especially at high speeds and
low temperatures.
Low heating-up of bearings due to low lubricant friction leading
to longer service lives.
VOX LHS 18 Is a dynamically light
long-term grease for plain and rolling bearings. It consists of
ester oil, mineral oil and lithium soap. The product is
resistant to ageing, oxidation and water, and it protects
reliably against corrosion.
VOX LHS 18 is suitable for plain and
rolling bearings operations at low temperatures and/or high
speeds, for example in grinding spindles, machine toll spindles,
spindle bearings, textile spindles, bearings IOE-spining
turbines, bearings in precision and optical equipment.
The lubricant is applied by brush, spatula,
grease gun or grease cartridge. Owing to the different
compositions Of elastomers and plastic materials, compatibility
tests are indispensable before series application.
The minimum shelf life is approximately 36
months if the product is stored in its unopened original
container in a dry, frost-free place.
1 Kg. cans
15 Kgs. Buckets
180 Kgs Drum |
MATERIAL SAFETY DATA
SHEETS
|
Material safety data sheets can be downloaded
or requested via our website http://localhost/pub. You
may also obtain them through your contact person at Power Vox
Lubrication.
PRODUCT DATA
|
VOX LHS 18 |
Oil type / thickener mineral oil, |
mineral oil, ester oil / lithium soap
|
Service temperature range* , (-C) approx |
– 50 to 120 |
Texture |
homogeneous, short-fibred
|
Density at 20ºC,(g/cm²) approx. |
0.88 |
Worked penetration, DIN ISO 2137, at 25ºC, (0.1mm) |
265-295 |
Apparent dynamic viscosity grade*** |
L |
Base oil viscosity, DIN 51562
pt.01
at 40ºC,(mm²/s), approx.
at 100ºC,(mm²/s), approx.
|
15
3.5
|
Corrosion protection of lubricating greases, DIN 51802, (SKF-EMCOR),
1 week, distilled water, corrosion rating. |
0 |
Low-temperature torque, IP 186
at
60 °C, starting torque, [mNm]
at
-60 °C, running torque, [mNm]
|
1-000100 |
Drop point, DIN ISO 2176, [°C]
|
>190 |
Speed factor** (n x dm), [mm/min], approx.
|
1 000 000 |
|